Data and Voice Network Cabling
eTribeca provides a comprehensive service in the design, installation, support, testing and certification, of Voice, Data, Video and Fiber Optic cabling for business of all sizes.
Copper cable for Structured Cabling System:
- Category 3 - Data rate of 10 Mbit/s (TIA/EIA-568-B)
- Category 4 - Data rate of 16 Mbit/s
- Category 5 - Data rate of 100 Mbit/s (ANSI/TIA/EIA-568-A)
- Category 5e - Data rate of 100 Mbit/s (TIA/EIA-568-B)
- Category 6 - Suitable for 10BASE-T/100 BASE-TX (TIA/EIA-568-B standard)
- Category 6e - Suitable for 10GBASE-T
- Category 7 - data rate of 10 Gbit/s (ISO/IEC 11801:2002 Category 7/class F)
Fiber Optic cable:
- Singlemode 8/125 (OS1) Gigabit Ethernet and 10 Gig Ethernet for up to 2km
- Multimode 62.5/125 (OM1) data communications
- Multimode 50/125 (OM2) video & data communications
- Multimode 50/125 (OM3) Gigabit Ethernet and 10 Giga Ethernet for up to 300m
Data center, computer room and telephone closet:
- Removal of outdated cabling system
- Replace outdated termination equipment (i.e. patch panels)
- Update cabling management to meet building and fire codes
- Installation and removal of cabling from subfloor system
- Installation of cable management systems
Project Management:
- Consultation and planning
- Ensure coordination with architects, general contractors and other trades
- Project updates and reports
- Post cut/conversion support and clean up
- Provide advice and support for system/network design by selected vendor; acting as a facilitator between the client and the vendor to ensure that the client's requirements are met
Backbone cable:
- 100 ohm UTP 100 to 1200 pair cable
- 62.5/125 multimode fiber cable
- Multimode 50/125 (OM2)
- Single-mode fiber cable
Coaxial cable:
- Coaxial Cabling: RG59 & RG62, etc.
- Testing and certification
Moves, adds and Changes:
- Move existing cables, install new cable in existing spaces
- Modify/re-termination of existing cables for new applications
- Repair of existing fiber, data, phone and riser cables
- Re-termination and testing of existing cabling
